Detailed Product Description

Specifications:1) Models: TNCF6-300 / 400 / 500 / 600 / 700 / 8002) Material width (mm): 300 / 400 / 500 / 600 / 700 / 8003) Material thickness (mm): 0.8 - 8.04) Coil load (kg): 3,000 / 5,0005) Coil inner diameter (mm): 5086) Coil outer diameter (mm): 1,2007) Speed (m/min): 0 - 128) Motor (kW): AC 5.0 / 7.09) Inverse curve roll: lower 1 set10) Work roll: upper 3 / lower 411) Expansion method: hydraulic12) Uncoil method: master13) Uncoil sensor: photo sensor14) Uncoiler power (kW): AC 1.5 / 2.215) Coil car: optional16) Air hold down arm: stander17) Feed level: 1,100 - 1,20018) Feeding line can be easily adjusted by advanced worm gear screw jacks device19) The straightener can be opened for the cleaning of rolls20) Thickness adjustment with 4 worm gear micro-adjuster by reading 0.1mm advanced reference indicator21) All rolls are made of bearing steel (SUJ2) and have all been quenched, hard-chrome plated and ground with min. HRC 60 degrees22) Uncoiler with inverter control and refernce indicator adjuster23) With out going catenary to assist and support the material24) Power hold down arm device25) Inverse curve roll easy to set up the curve or down curve feeding exit direction
26) With electric eye loop control system27) With threading table device28) With coil side guide29) A cluster gear set maximizes transmission of horsepower30) Left / right swing tension roll support deviceOuter packing: Wooden case